Loft Room Bedroom Package in Solid Oak

A bedroom in one delivery, sized for a loft or attic bedroom, where everything has to be low enough to sit under a sloping ceiling and narrow enough to come up a loft stair. Nothing over 800mm wide, and the walkway either side of the bed is part of the plan rather than what is left over.

A package is cheaper than the pieces bought separately and, more usefully, it arrives in one delivery on one day. Furnishing a flat one item at a time from four different shops means four deliveries, four assembly sessions and four sets of packaging to get rid of, which in a flat with no garage is its own problem. Everything in a package is in the same material and the same finish batch, and it is all sized to work together in the floor area stated rather than simply to be small individually.

Specification

• Dimensions: every piece under 800mm wide
• Floor footprint: about 1.4 square metres
• Material: solid European oak, 20mm panels and 40mm legs, finished in a hardwax oil that you can repair with a cloth rather than a professional
• Finish: one finish batch across the package
• Capacity: sized for a loft or attic bedroom, where everything has to be low enough to sit under a sloping ceiling and narrow enough to come up a loft stair
• Assembly: flat packed, about 4 hours in total
• Getting it in: Flat packed in 5 cartons, largest 820mm by 1950mm by 200mm. Through a standard 762mm door: on its side, yes. Into a small lift: only in a lift with a 1400mm car, otherwise it goes up the stairs
• Weight: approximately 138.0 kilograms
• Contents: one 800mm low wardrobe at 1500mm high, two 400mm low bedside tables, one 800mm low chest of six drawers, one folding valet stand
• Saving against buying separately: about 12 per cent
• Bed frame and mattress are not included and are not something we make
• One delivery slot, two person delivery to the room
• Everything comes apart flat for the next move

What you get

• One 800mm low wardrobe at 1500mm high
• Two 400mm low bedside tables
• One 800mm low chest of six drawers
• One folding valet stand
• Anti tip straps for the tall pieces
• Felt pads on every foot
• One hex key and one spanner for the whole package
• A room plan with the walkways drawn in

Assembly

Flat packed and best done by two people, mostly for the moment you stand it up. About an hour with a hex key and a spanner, both in the box. Fittings are cam locks and threaded steel inserts, so it comes apart and goes back together properly rather than chewing out the panel.

If you are renting

Freestanding, no wall fixing needed and no holes in anybody's plaster. An anti tip strap is in the box if you want it and there is nothing to make good if you never use it. Felt pads are fitted to every foot as standard, because the other way to lose a deposit is a scratch across a floor you did not lay.