Mobile Drawer Unit 400mm Wide with Three Drawers in Solid Oak

Mobile Drawer Unit 400mm Wide with Three Drawers in Solid Oak

Matt black handles
£359.00
Skip to product information
Mobile Drawer Unit 400mm Wide with Three Drawers in Solid Oak

Mobile Drawer Unit 400mm Wide with Three Drawers in Solid Oak

£359.00
Taxes included. Shipping calculated at checkout.
Finish

A 400mm chest of three drawers at 450mm deep. On braked castors so it rolls under a desk and out again.

Everything we sell is under 800mm wide. That is not a style, it is the constraint the whole range is designed around, because it is the measurement that decides whether a piece of furniture works in a small flat. Eight hundred millimetres is roughly the width of a standard internal door, the width of the gap most people have between a sofa and a wall, and the point past which a piece stops reading as part of the room and starts reading as an obstacle. Designing to it is harder than designing without it and it is the only interesting thing about furniture for small spaces.

Specification

  • Dimensions: 400mm wide by 450mm deep by 380mm high
  • Floor footprint: 0.18 square metres
  • Material: solid European oak, 20mm panels and 40mm legs, finished in a hardwax oil that you can repair with a cloth rather than a professional
  • Finish: hardwax oiled or sprayed, handles in your chosen finish
  • Capacity: 12kg per drawer, 20kg on the top
  • Assembly: flat packed, about 30 minutes
  • Getting it in: Flat packed in 1 carton, largest 460mm by 850mm by 200mm. Through a standard 762mm door: yes. Into a small lift: yes
  • Weight: approximately 22.0 kilograms
  • Drawers: three, soft close, full extension
  • Runners: steel ball bearing, rated to 30kg and tested to 50,000 cycles
  • Drawer boxes: solid timber sides with a dovetailed front
  • Castors: braked, two of four
  • Comes apart flat for a move

What you get

  • The carcass and drawers, flat packed
  • Soft close runners, pre fitted to every drawer
  • Handles in your chosen finish
  • Braked castors
  • Felt pads, hex key and printed instructions

Assembly

Flat packed, with a hex key, a spanner and printed instructions in the box. Fittings are cam locks and threaded steel inserts rather than chipboard screws, which is what lets a piece be taken apart and reassembled without the joints going loose. We reckon on three moves and have tested to ten.

If you are renting

Freestanding, no wall fixing needed and no holes in anybody's plaster. An anti tip strap is in the box if you want it and there is nothing to make good if you never use it. Felt pads are fitted to every foot as standard, because the other way to lose a deposit is a scratch across a floor you did not lay.

Goes well with...