Nest of Three Tables and a Matching Sideboard in Solid Walnut

Nest of Three Tables and a Matching Sideboard in Solid Walnut

Matt black legs
Sale price  £2,074.00 Regular price £2,424.00
Skip to product information
Nest of Three Tables and a Matching Sideboard in Solid Walnut

Nest of Three Tables and a Matching Sideboard in Solid Walnut

Sale price  £2,074.00 Regular price £2,424.00
Taxes included. Shipping calculated at checkout.
Finish

the same nest with an 800mm sideboard, which is most of a small living room in one order.

Everything we sell is under 800mm wide. That is not a style, it is the constraint the whole range is designed around, because it is the measurement that decides whether a piece of furniture works in a small flat. Eight hundred millimetres is roughly the width of a standard internal door, the width of the gap most people have between a sofa and a wall, and the point past which a piece stops reading as part of the room and starts reading as an obstacle. Designing to it is harder than designing without it and it is the only interesting thing about furniture for small spaces.

Specification

  • Dimensions: console 700mm by 300mm by 780mm, tables 450, 400 and 350mm wide
  • Floor footprint: 0.21 square metres for the console, tables nest inside it
  • Material: solid American black walnut, finished in hardwax oil, which darkens very little because walnut arrives dark
  • Finish: hardwax oiled, legs in your chosen finish
  • Capacity: 25kg per table, 45kg on the console
  • Assembly: flat packed, about 40 minutes for the set
  • Getting it in: Flat packed in 2 cartons, largest 760mm by 800mm by 340mm. Through a standard 762mm door: on its side, yes. Into a small lift: yes
  • Weight: approximately 74.0 kilograms for the set
  • Table heights: 520, 460 and 400mm, which is a coffee table, a side table and a footstool height
  • Nesting clearance: 20mm all round, so they do not scuff each other
  • Console depth: 300mm, shallow enough to sit behind a sofa
  • Legs: solid timber or steel, chosen at order
  • Felt pads on every foot, spares in the box

What you get

  • One console table
  • Three nesting tables
  • Legs in your chosen finish
  • Felt pads and a spare set
  • Hex key and printed instructions

Assembly

Flat packed, with a hex key, a spanner and printed instructions in the box. Fittings are cam locks and threaded steel inserts rather than chipboard screws, which is what lets a piece be taken apart and reassembled without the joints going loose. We reckon on three moves and have tested to ten.

If you are renting

Nothing here touches the wall. No drilling, no anchors, no filler and no repainting on the way out. Felt pads on every contact point, and a set of spare pads in the box for when the first set wears through.

Goes well with...